Bluehive Bluebass Elite Wireless ANC Headphones

Description

Bluehive headphone's advanced active noise canceling technology blocks out background noise to provide an immersive musical surrounding, allowing you to truly lose yourself in your tunes. With high sound quality and features like Bluetooth wireless connectivity, the Bluehive headphones deliver crisp, balanced audio. The comfortable over-ear design ensures long-lasting comfort, while the included USB-C charging cable provides convenience.

Key features:

• High sound quality and premium features

• Comfortable fit

• USB-C charging cable included

• Up to 25 hours of continuous playback time on a single charge

• Built-in microphone for hands-free calling

• User manual included

Charging your Headphones:

	Plug the Type-C charger into the charging port on the bottom of the right headphone.
Slot the other end of the USB cable into a power source such as a computer, laptop or wall charger.
	The red light will turn on, indicating the headphones are charging. Charging time is approximately 2 hours. Once the headphones are fully charged, the charging indicator will turn off. When fully charged, disconnect the headphones and remove the USB cable from the power source.

KEEP IN MIND:
When the headphone battery is out of power, the red LED indicator flashes once every 10 seconds. Recharge the headphones as soon as possible. The headphones cannot be operated during charging.

Pairing your headphones with a Bluetooth device:

1. Turn on your headphones by pressing and holding the button for 2 seconds until you hear the prompt “Power On” blue and red lights light alternately. The headphones are now in pairing mode and ready to be connected to your Bluetooth® device.
2. Open your Bluetooth® device. Keep the headphones and Bluetooth® enabled device within 32’ (10 m) of each other during the pairing process.
3. Go to the Bluetooth® setting menu on your phone/tablet/Bluetooth® device. Connect to the device listed as “Bluebass Elite”. A prompt “Connected” indicates your device has been successfully connected and the headphones are ready to use.

KEEP IN MIND:
The next time you use your headphones, it will automatically attempt to connect back to the previously paired Bluetooth® device. If the headphones do not find a connection or are disconnected over 5 minutes, they will shut down automatically.

Connecting your headphones using the included audio cable:

	Slot one end of the 3.5 mm audio cable into the 3.5 mm audio cable socket on the bottom of the right headphones.
Slot the other end of the audio cable into the audio out socket on the device you want to connect to the headphones.
	When a device is connected to the headphones using the audio cable, The  control on the headphones will not work with the connected device. You will have to use the device's controls to play/pause, skip tracks, and adjust the music volume. When using a 3.5 mm audio cable, you cannot use the microphone built into the headphones. When using the audio cable, the headphones are not required to have power.

IMPORTANT: The ANC function uses more power when turned on and will reduce the use time after the headphone is fully charged.

Maintenance and Care:

1. Before using your headphones, examine the headphones to make sure that they are clean.
2. Similarly, inspect the ports and jacks of your headphones to make sure that they are clear of dust and debris before charging.
3. Use a soft cloth or paper towel to clean your headphones. Do not allow moisture to get inside the headphones.
4. Never use any harsh chemicals or detergents for cleaning. Make sure your headphones are dry before using them.
5. When your headphones are not in use, they should be stored in a cool, dry place.
6. Never tug or yank on the USB cable while it is connected to your headphones.
7. Connect and disconnect cables as carefully as possible.
8. Never expose your headphones to high temperatures, extreme cold, high humidity, or excessive moisture or water.

Troubleshooting

Problem	What To Do
Headphones do not power ON	Headphones have run out of power; recharge for approximately 2 hours to fully charge using the USB cable.
Cannot find headphones in the Bluetooth pairing list	1. Delete the pairing list in the Bluetooth device and reconnect. 2. If it still cannot be found, please restart both the Bluetooth device and headphones.
Interrupted connection	1. Power is too low; recharge the headphones. 2. Device beyond 32’ (10 m) range, or the signal has been blocked by an obstacle.
No sound when calling	Check the Bluetooth settings in your device to ensure the headphones are connected or turn the volume up on the device or headphones.
No sound when playing music	Check the Bluetooth settings in your device to ensure the headphones are connected or turn the volume up on the device or headphones.
No sound when using the 3.5 mm audio cable	Turn the device volume up. Check the jack plugs are correctly inserted. Check the 3.5 mm audio cable has not become damaged.
Unable to charge	Check the charging cable is connected properly and that it has not been damaged. If using a charging adaptor, ensure it is inserted correctly and not damaged.

 

Specifications

• Brand: Bluehive
• Part number: IN200166
• Accessories List: Aux Cable, Charging Cable
• Assembled L x W x H (cm): 19.50 x 8.50 x 17.70 cm
• Assembled Weight (kg): 0.24 Kg
• Batteries Required Quantity: 2
• Battery Charge Time (hr): 2 hrs
• Battery Life (hr): 15 hrs
• Battery Technology: Lithium Polymer
• Battery Type/Battery Size: Integrated Rechargeable
• Cushion Material: Foam
• Decibel Rating (dB): 95 dB
• Effective Wireless Range (ft.): 32.80 ft
• Headphone Type: Over-Ear
• Maximum Frequency Range (MHz): 0.02 MHz
• Minimum Frequency Range (MHz): 0.00 MHz
• Non-toxic When Used as Intended: Yes
• Number of Pieces: 1
• Power Source: Battery
• Primary Colour: Black
• Product Use(s): General purpose
• Smart System Compatibility: Android, Apple iOS, Bluetooth, IPhone
• Voltage (V): 4V
• Wattage: 1W
• Package LxWxH (cm): 18x8.5x20 cm
• Read more less